KOBARA ("COBRA") FRAME KIT! (4" MICRO FPV!)

TMAC FPV 3D PRINTED QUADCOPTER FRAMES & ACCESSORIES!

As of July 25th, 2021, now printed with carbon fiber PLA filament for added strength, durability & less weight!

TMac Guarantee!

1. If for any reason you are unhappy with your Kobara Frame Kit purchase, simply return it in it's original condition within 2 weeks of purchase date for a full cost-of-purchase refund (minus shipping cost).

2. If you break your Kobara baseplate or top plate within 30 days of date of purchase, TMac will send you a new one for free! You pay for shipping. Contact TMac directly at tmac@tmacfpv.com and send an image of the broken plate(s) along with a snapshot of your packing slip you received with your Kobara Frame Kit. Images of both the broken plate and your packing slip are required.

NOTE:  Please do not expose your 3D printed frame to high heat for an undue amount of time.  Exposure to high heat (direct contact with soldering iron, heat gun, enclosed vehicle during hot day, etc.) will deform and damage your frame.  This damage is not covered under warranty.  The heat distortion temperature (HDT) of your frame's filament is approximately 54 degs Celsius = 129 degs Fahrenheit and temp's approaching this should be avoided

Kobara 4"

20x20 & AIO stack mounts

motor mount slots for 9x9 & 12x12 motors

Carbon Fiber infused filament 3D printed

$17.95

KOBARA FRAME KIT

CONSISTS OF:

1 ea base plate ~ 3.5mm

1 ea top plate 2.5mm

6 ea 20mm knurled standoffs

m2 x 6mm screws

Custom 3D printed camera mount

FEATURES & BENEFITS

MIcro FPV 4" - Perfect for eXtended Flights (XF), Long Range, just plain fun!

Supports both 20X20mm & 26.5x26.5 all-in-one (AIO) FC/ESC boards natively (no adaptor mounts necessary!)

KOBARA (pronounced "Cobra")
Max 4" Props
Variable Dual flight stack mounting
2 - 20x20 stacks
2- AIO stacks (Caddx Vista, Shark Byte & AIO Whoop FC) - no mount adaptors required!
1-20x20, 1 AIO (your choice front or back for either!)
Caddx Vista & Shark Byte compatible
Variable stack positions (adjustable)
9x9mm motor mount & 12x12mm motor mount
Recommended 13xx-15xx motors (1404s & 1504s are optimal for longer flights & more fun!)
Top Mount or Bottom Mount
3D printed camera mount or metal bracket camera mount
Variable camera positions (adjustable)
Variable height top-plate (simply use shorter/longer standoffs)
Lightweight AND durable!
No props in view of camera!
Simple assembly!

Optional 3D print accessories (see below for free print files): 20x20 to AIO board mounting adaptor, GPS module mount, Naked GoPro Universal Mount
Extremely lightweight for optimized thrust-to-weight ratio

Easy access to electronic flight components - just remove 6 screws and top plate!


Kobara Spare Baseplate

$9.99

Kobara Spare Top Plate

$5.99

SHARE THIS SITE

Share on InstagramShare on Youtube