Pygmy Rattlesnake image courtesy of,

and Special Thanks to, Dr. Steve A. Johnson!

Pygmy Rattlesnake image courtesy of,

and Special Thanks to, Outdoor Photographer Neil Jernigan!

click on image above to view

Neil's Carolina Pygmy Rattlesnake video

TMac Guarantee!

1. If for any reason you are unhappy with your Pygmy Rattler Cinewhoop Frame Kit purchase, simply return it in it's original condition within 2 weeks of purchase date for a full cost-of-purchase refund (minus shipping cost).

2. If you break your Pygmy Rattler Cinewhoop baseplate or top plate within 30 days of date of purchase (prop guards cannot be guaranteed due to diversity of individual's flight skills), TMac will send you a new one for free! You pay for shipping. Contact TMac directly at and send an image of the broken plate(s) along with a snapshot of your packing slip you received with your Nexus Frame Kit. Images of both the broken plate and your packing slip are required.

NOTE:  Please do not expose your 3D printed frame to high heat for an undue amount of time.  Exposure to high heat (direct contact with soldering iron, heat gun, enclosed vehicle during hot day, etc.) will deform and damage your frame.  This damage is not covered under warranty.  The heat distortion temperature (HDT) of your Pygmy Rattler Cinewhoop frame's filament is approximately 77 degs Celsius = 170 degs Fahrenheit and temp's approaching this should be avoided

Your Pygmy Rattler Cinewhoop is custom made to order. Please allow 1-2 days processing time before shipment. Thank you for your patience!

Should you have any questions regarding your frame, assembly, build, and/or tune again, email me at . To help with your build's tune, the free Micro FPV Tuning Guide is available for download here! As all frames are individually & carefully made-to-order, please allow for 1-2 days processing prior to shipment. Clear skies!

Pygmy Rattler 3" Cinewhoop

26x26 AIO (whoop) board & 20x20 stack mounts

12x12 & 9x9 motor mount slots

3D printed frame




1 ea base plate approx 3.25mm

1 ea top plate approx 2.5mm

4 x Prop guards

6 ea 20mm knurled standoffs

m2 x 6mm screws

Custom 3D camera mount


Perfect for "naked" GoPro or insta360GO platform!

Flight control stack mounting pattern supports 20x20 & 26x26 stacks

Supports 14mm Nano Cameras

Motor mount slots support 9mm and 12mm motor mounts for 11xx-1504 motors (recommend 1404)

3-inch max prop size

Lightweight Cinewhoop frame to complete your build under 250 grams all-up-weight!

Simple to Assemble - 6 standoffs & 12 screws

Easy access to electronic flight components - remove 6 screws and top plate!

Pygmy Cinewhoop Spare Baseplate


Pygmy Cinewhoop Spare Top Plate


Pygmy Cinewhoop Extra Prop Guard - $2.99 each

OR purchase other 3" Prop Guards HERE

Custom 3D printed GPS module & VTX antenna mount (fits BN-220 type GPS modules AND Matek SAM M8Q modules)

Print your own here or grab one by clicking on Add to Cart button - $3.99


Share on InstagramShare on Youtube